Automotive adhesive portfolio

Rapid lamination of foam, acoustic cotton, fiber felt, nonwoven fabric and automotive sound-insulation parts

• Typical solids approx. 50%
• Recommended press time at 20°C: 1-10 s
• Can be joined immediately after spraying

Source

TDS R-5110 ver. 25.6 / RELANET project record

Boundary

Typical values under TDS conditions; the Corolla acoustic-component reference is an internal project record

Updated

2026-07-20

Rapid lamination of instrument panels, door panels, seats, center armrests and luggage-compartment trim

• 1 minute after bonding: average 25 N/25 mm
• After 7 days of curing: approx. 60 N/25 mm
• Mix ratio, pot life and solids: refer to the current issued TDS

Source

Company test conditions (published 2026-09-20)

Boundary

R-5670 + R-60C; PVC/knitted fabric bonded to flame-treated PP. Timing starts at completion of bonding. Typical results are not a performance guarantee for a specific project.

Updated

2026-09-22

Manual wrapping, hot pressing or vacuum forming of door panels, instrument panels and parcel shelves

• Typical solids approx. 50%
• Activation temperature >60°C
• Drying at 50-70°C for 8-15 min

Source

R-5610 TDS ver. 25.6 (document version 2024-03)

Boundary

Typical process window after spraying and full drying; optical performance depends on coat weight and real substrates

Updated

2026-07-23

Instrument-panel and door-panel skins, sunroof reinforcement, brackets and wire-harness fixing

• Approx. 99% solids
• Open time at 180°C approx. 1-2 min
• Project target: no debonding at 110°C

Source

Current TDS / test report RCTSC-25-10-18-001

Boundary

The 110°C result is a project target under confirmed conditions, not a universal guarantee

Updated

2026-07-23

Door-panel skins, sunroof attachments, spare-wheel covers and door-panel inserts

• Open time at 180°C: 1-2 min
• ABS requires project validation; confirmed clean PP can be bonded without primer, flame or plasma
• ≥99% solids; 90°C heat-resistance target

Source

TDS R-7110 APAO / RELANET project data

Boundary

Open time is typical at 180°C; heat resistance must be validated for the actual part, load and customer standard

Updated

2026-07-23

Illuminated instrument panels, light-emitting door trim, ambient-light panels, illuminated logos and hidden graphics

• Average visible-light transmission approx. 91%
• ΔE approx. 1.0 after 110°C × 1,500 h
• Approx. 45 N/25 mm after 1 minute

Source

RY-10 TDS / transmission workbook / formal project test report

Boundary

Transmission, color difference and peel results are typical for defined thicknesses, specimens and project conditions

Updated

2026-07-20

A next-generation automotive-interior wrapping adhesive: physical initial tack plus moisture-cure chemical crosslinking for rapid positioning on automated lines

• Ultra-high elongation: Elongation at break ≥ 500%
• Humidity-heat ageing: 1,000 h at 85°C / 85% RH
• Dual cure: Physical initial tack + moisture-cure chemical crosslinking
• Process-friendly: Open time 3-4 min
• Odor assessment: NES M0160; confirm VOC, durability and regulatory requirements separately
• Candidate substrates: PP / ABS with leather / microfiber / suede; validate each combination and pretreatment

Source

R-9610 product technical data

Project status

No project track record yet

Updated

2026-09-09

Published values refer to the stated test conditions. Validate actual substrates, processing, durability and finished-part requirements against the applicable customer standard before use.